Broan Nutone has been in the range hood industry for a little over 90 years. Being kitchen ventilation their general area of focus, they went on making ceiling fans, doorbells, heaters, and home theater systems. 

But we are not here for the history, we are here because it’s confusing how you install a range hood filter. So how do you install a Broan Nutone range hood filter? 

You simply slide in the back of the filter under your range hood and push it forward to lock it.

It might differ from one model to another. Also, there are different filters. So let’s go into details about it, shall we? 

Installing Broan Nutone Range Hood Filter

Like any range hood, Broan Nutone hoods have a filter that is secured with a lock. So to install your filter, you’ll have to start from the opposite side of the lock. Here is how you do it.

Step 1: Push the Back Part of the Filter into the Hood

Start by placing the back part of the filter in the dedicated frame of the hood. 

Step 2: Move It Forward Toward You

Now lift the front part up and slide it towards you in the hood. There will be a finger insert or push/pull pin connector in this part. 

Step 3: Clicking Lock Sound

You’ll get a clicking sound that will assure your filter is secured. 

How Do I Change the Filter on My Broan Range Hood?

Changing your Broan range hood filter is just the opposite of installing it. 

Step 1: Simply put your finger in the dedicated insert and push backward. Some filters will come with a push/pull liver that you’ll have to use to unlock it. 

Step 2: The front part will come off. 

Step 3: Pull out the filter and replace it with a new one with the same process, just backward. Simple as that. 

Pro Tip:

• All filters come with an installation guide. As they differ in process and depending on your hood model, do follow them. 
• You can use a degreasing agent to clean your hood filter. Make sure you don’t use them on the frame as it will destroy the aluminum frame. 
• Clean your filter regularly to keep your cooker hood functioning properly. Don’t wait on changing for a new one. 

Frequently Asked Questions and Answers

How do you clean a Nutone hood filter?

To clean your Nutone hood filter, take the filter out. This means clicking on the liver pushing it backward, and then pulling it out. Soak it in the sink with warm water, then spray it with a degreaser. Dishwashing soap will do, but if the grease buildup is greater than normal, a degreaser does a better job. Give it a scrub with a brush, and let it dry. And you will have a clean hood filter. 

What is the best type of filter in a range hood?

There are basically 3 types of filters for range hoods in the market. Aluminum or stainless mesh filters (honeycomb filters), Baffle filters, and the good old Charcoal filters. You will also find fabric filters, which have a short lifetime. The mentioned 3 filters above are the best in their job. 

Can you wash carbon hood filters?

There are two types of carbon hood filters. One is non washable which you change every 6 months. And the other one is washable which you can keep on using and wash every 4 months. So read the level when you buy them. To wash a carbon hood filter, simply soak them in soap water and then rinse them. Let it dry completely before putting it back in. You can also go for the dishwasher. But do not rub or sponge it. 

How do you install a Broan Nutone range hood?

As there are different models of Broan Nutone range hoods, each model has their unique structure and installation method. Searching the model number will get you step details to install along with the illustrated guide. 

Conclusion 

Installing your Broan Nutone filter might sound a bit confusing at first, but it’s just a simple slide and push-in process. You can use stainless, carbon, or any type of filter you want. Make sure you buy the right size and model according to your range hood. Enjoy cooking like crazy!